Scout Wifi onBoard Скачать руководство пользователя страница 1

www.scoutantenne.com

Page 1/8

To avoid burning and voltage caused traumas, of the personnel working with the device, please follow these safety requirements:

The device is intended for supply from a Limited Power Source (LPS) that power consumption should not exceed 

15VA and current rating of over current protective device should not exceed 2A.

The highest transient over voltage in the output (secondary circuit) of used PSU shall not exceed 36V peak.

The device can be used with the Personal Computer (first safety class) or Notebook (second safety class). Associated 

equipment:  PSU  (power  supply  unit)  (LPS)  and  personal  computer  (PC)  shall  comply  with  the  requirements  of 

standard EN 60950-1.

Do not mount or service the device during a thunderstorm.

To avoid mechanical damages to the device it is recommended to transport it packed in a damage-proof pack.

To avoid mechanical damage to the device it is recommended to transport it packed in a damageproof pack. When using the 

device it should be placed so that its indicating LEDs would be visible as they inform in which working mode the device is in and if 

it has any working problems.

Protection against over current, short circuiting and earth faults should be provided as a part of the building installation.

Signal level of the device depends on the environment in which it is working in. In case the device starts working insufficiently, please 

refer to qualified personnel in order to repair this product. We recommend forwarding it to a repair center or the manufacturer. 

There are no exchangeable parts inside the device.

Protection in primary circuits of associated PC and PSU (LPS) against short circuits and earth faults of associated PC 

shall be provided as part of the building installation.

Wifi onBoard

 - 4G/LTE dual sim 10 dB WiFi antenna

Code: PF AN NWIFI12

4G onBoard

 - 4G/LTE dual sim 4 dB 4G/LTE antenna

Code: PF AN NWIFI13

4G onBoard 

Plus

 - 4G/LTE dual sim 2x 4 dB 4G/LTE antenna

Code: PF AN NWIFI11

WiFi + 4G onBoard

 - 4G/LTE dual sim 10 dB WiFi a 4 dB 4G/LTE antenna

Code: PF AN NWIFI08

WiFi + 4G onBoard 

Plus

 - 4G/LTE dual sim 10 dB WiFi a 2x 4 dB 4G/LTE antenna

Code: PF AN NWIFI14

Quick start guide

(v2.19)

Thank you for purchasing a Scout product. This guide refers to all the WiFi/4G systems listed above, before installing the router 

and the antenna(s) please read carefully all instructions. Customer comments are welcome.

Содержание Wifi onBoard









Отзывы: