Press the following buttons:
9
,
9
, and
3
. The Scout's red light will blink twice.
2.
Press and release the
CBL
button. The Scout's red light will blink twice.
3.
Now whenever you press the
VOL UP
/
DWN
buttons on Scout, your volume will be controlled by
your cable converter.
4.
To return the volume to the TV:
Press and hold the
SETUP
button until Scout's red light blinks twice, then release the
SETUP
button. Press the following buttons:
9
,
9
, and
3
. The Scout's red light will blink twice.
1.
Press and release the
TV
button. The Scout's red light will blink twice.
2.
Now, whenever you press the
VOL UP
/
DWN
buttons on the Scout, your volume will be controlled by
your television.
3.
Back to Top
Troubleshooting
Problem
Solution
Red light not blinking when you press a
button?
Replace the batteries with 4 new AAA
batteries.
The Scout does not operate your television?
Make sure the television you are trying to
operate can be worked with an infrared
remote control.
The red light blinks when you press a button
but you receive no response from your
television or cable converter?
Make sure you are aiming your Scout at
your television or cable converter and
that you are within 15 feet before using
your remote.
Back to Top
