Scotty SCP, Руководство по эксплуатации оборудования

Страница: 12 / 36

SCOTTY SCP Equipment Manual
12 All rights reserved.
4.2 Cooling and Ventilation
The SCP requires cooling. Although it will protect itself against overheating,
the self-heating power must be dissipated through the mounting structure
and/or through air circulation.
On default, the SCP comes with two 80mm temperature controlled fans
mounted on top of the unit.
Alternatively, the installation of the SCP in an environment with sufficient
forced air cooling is feasible.
4.3 Electrical Installation
The SCP gets connected with three circular style connectors. Power supply,
monitor, keyboard, mouse, headset, Ethernet and more are available on these
connectors. For details, see chapter Connectors and Pin-Outs.
The use of shielded cables is highly recommended. Use shielded twisted-pair
wiring for all balanced connections, and coax cables with the appropriate
impedance.
Before connecting the unit, make sure the power supply matches power
requirements (see chapter Power Requirements) and is properly fused.
4.4 Software Configuration
To allow optimal operation, the software settings of the SCP need to match
the electrical installation and the external equipment.
Therefore, especially the codec audio and video settings in the
Config Utility
and in the
Teleport
application should be configured as required.
Please refer to the chapter Connectors and Pin-Outs for the signal labels
cross-referenced by software and hardware.
For configuration details, please refer to the Software Manual.