SCOTTY SS DB-202A, Руководство пользователя

Страница: 12 / 49

SCOTTY SS – INSTRUCTION MANUAL
Scotty SS Nov-05 11
SECTION 2 – INSTALLATION INSTRUCTIONS
2.1 Introduction to Installers
Before installing this KERR SCOTTY SS Wood Furnace, please read the following
instruction manual carefully. This unit is designed to be an add-on to a central heating
furnace to provide complete central heating in medium sized well-insulated homes.
Before installing be sure unit is properly sized for the intended application. Warranty
does not cover misapplication of unit.
Applicable Standards
The KERR SCOTTY SS Wood Furnace must be installed in accordance with the
requirements of the National Fire Protection Association codes, the Canadian Heating,
Ventilation and Air Conditioning Code, The National Board of Fire Underwriters, and the
CSA Standards for solid fuel burning equipment as outlined in B365-01. In all cases
consult your local authorities and fire insurance company for specific regulations.
2.2 Uncrating
When you receive your KERR SCOTTY SS Wood Furnace, check it carefully to ensure
that all components are present and in good condition. If there has been any damage
or loss in transportation, please notify the carrier and retailer at once. Inspect for the
following:
1.
Firebox/Heat exchanger
2. Poker/Coals rake
3. Marking template (return air and power failure bypass inlet)
CONTROL KIT A
(Oil add-on), or E (Electric add-on) selected according to
installation, which includes:
1. L4064R Fan and Limit Control
2. Control Mounting Plate
3. Damper Motor
4. Thermostat (T822D or equivalent)
5. Wiring Harness and Parts
6. Switching Relay R8405C (8A05A – 4) – Kit “A” & “E” only
NOTE: Some parts may be packed inside furnace firebox. Check shipment carefully
before assuming shortage.