Scotts S2048, S2554 Скачать руководство пользователя

Страница: 39 / 95

Service Machine Safely - Page 33

SERVICE MACHINE SAFELY

Practice Safe Maintenance

• Understand service procedure before doing work.
Keep area clean and dry.

• Never lubricate, service, or adjust machine while it is
moving. Keep safety devices in place and in working
condition. Keep hardware tight.

• To prevent them from getting caught, keep hands,
feet, clothing, jewelry, and long hair away from any
moving parts.

• Before servicing machine, disengage all power and
stop the engine. Let engine cool.

• Securely support any machine elements that must be
raised for service work.

• Keep all parts in good condition and properly
installed. Fix damage immediately. Replace worn or
broken parts. Remove any buildup of grease, oil, or
debris.

• Unauthorized modifications to the machine may
impair its function and safety.

Wear Appropriate Clothing

• Wear close fitting clothing and safety equipment
appropriate for the job.

• Loud noise can cause impairment or loss of hearing,
wear a suitable protective device such as earplugs.

• Do not wear radio or music headphones while
servicing the machine. Safe service requires your full
attention.

Avoid Injury From Contacting Blades

Before you unplug or adjust machine:

• STOP the engine.

• Remove key.

• Wait for blades to STOP.

• Keep hands, feet and clothing away from blades when
engine is running.

Содержание S2048, S2554
































































































Результаты поиска

Содержание S2048, S2554

Отзывы:

Похожие инструкции для S2048, S2554

Бренды по названию

Популярные бренды

Scotts S2048, S2554, Руководство оператора

Результаты поиска

Содержание S2048, S2554

Отзывы:

Похожие инструкции для S2048, S2554

Бренды по названию

Популярные бренды