GB-4
SET-UP
a. Remove the stylus protective cover, if necessary. Never touch the stylus tip during the
adjustment.
b. Lower the tonearm lever.
c. Release the tonearm clamp and release the tonearm from the arm rest.
d. Set the anti-skate adjustment to “0”.
e. Rotate the counterweight in either direction until the tonearm is perfectly balanced
horizontally (floats freely)
f. Return the tonearm to the arm rest and lock it in place.
g. Hold the counterweight stationary with one hand and rotate only the stylus pressure ring in
order to adjust the pressure: the centre line on the rear shaft of the tone arm should be
aligned with the number “0” on the stylus pressure ring.
h. Rotate the counterweight clockwise until the scale value corresponds to the recommend
stylus pressure.
Note: The recommended stylus pressure of the optional cartridge that may have been included
with your unit is 2 grams. For all other cartridge systems please refer to the manufactures
specifications included with the cartridge.
HEADSHELL AND CARTRIDGE ASSEMBLY:
When installing a cartridge, refer to the operating instructions of that cartridge. During installation,
attach the stylus protector to guard the stylus tip from damage.
Connect the headshell lead wires to the cartridge terminals. The terminals of cartridges and the
headshell lead wires are color-coded. Connect each lead wire to the cartridge terminals of the
same color.
White (L+)
L CH (+)
Blue (L-)
L CH (-)
Red (R+)
R CH (+)
Green (R-)
R CH (-)
CONNECTIONS:
Before connecting the unit it is advised that you also
consult the instruction manuals for your current
equipment.
Note: Be sure to turn off the equipment before you
make changes to the different connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input
of your amplifier.
Output terminals Amplifier (Receiver)
L (White) L CH
R (Red) R CH
You can also use a line input by setting the phono/line switch at the rear of the turntable to line.
Set the PHONO/LINE
switch to “LINE”
Set the PHONO/LINE
switch
to “PHONO”
