Page 20 of 26
Hot water button
Espresso button
Lungo button
In ECO Mode
Lights on
Flashing
Flashing
In Speed Mode
Flashing
Lights on
Flashing
In Default Setting
Flashing
Flashing
Lights on
3.
Press the hot water button for ECO mode, Espresso button for Speed mode and Lungo
button for Default setting. Two beep sounds will be heard, indicating that the mode is
selected.
(Note: If the corresponding button for each mode is pressed, the machine will not
respond).
4. To keep the settings unchanged, press
or wait for 5 seconds for the machine to
return to standby condition.
CLEANING & MAINTENANCE
I. DESCALING
When
is flashing, it indicates that the appliance needs to undergo descaling. The appliance
will remain in the best condition if this function is performed at least once a month or more
regularly depending on the hardness of water used. Follow the procedures below:
Note: The complete descaling process will take approximately 30 minutes. Do not switch off the
appliance or unplug during the process.
1.
Fill the water tank to the “MAX” level.
2.
Add one pack of cleaning agent into the water tank.
Important: Do not use vinegar or other cleaning agents to do descaling for this appliance.
It can damage the appliance.
3.
Plug in the appliance.
4.
Place a large container with at least 1.5L capacity under the coffee spout.
5.
Switch on the appliance.
6.
Press and hold
and Espresso button
for 5 seconds. A beep sound will be
heard and
and
will be flashing.
