GB
-
4
Note: The remote control battery normally lasts for about one year, although it
depends on how often and for what operations the remote control is used.
If the remote control is not working properly, replace the battery.
Precautions when using batteries
1.
CAUTION
: Danger of explosion if battery is incorrectly inserted. Replace only with the
same or equivalent type.
2. Do not mix different types of batteries together (e.g. alkaline, rechargeable and
standard (carbon zinc)) or old batteries with fresh ones.
3. Exhausted batteries must be removed to prevent possible leakage.
4. Dispose of batteries properly in accordance with the environmental regulations in force.
.
BASIC OPERATION
ON/ Standby
When it is connected to a power supply (refer to “
POWER SUPPLY
”), the unit
goes to standby mode and the clock time is displayed. Press the
ON/STANDBY
button to turn on the unit and press it again to go back to standby mode.
Setting the clock
1. In standby mode, press and hold down the
MEM/CLK
button and use the
/
/
buttons to select 24Hr or 12Hr clock display. Press the MEM/CLK
button to confirm.
2. Press the
buttons to set the hours, and press the
MEM/CLK
button to
confirm.
3. Follow above step (2) above to set the minutes.
Using the alarm
The unit allows you to wake up to the sound of the buzzer or to music
(Radio/CD/iPod).
Setting the alarm time
1. In standby mode, press the
AL1 or AL2
button to display the alarm time.
Then, press and hold down the
AL1 or AL2
button and the hour digits will flash.
2. Press the
buttons to set the hours.
3. Press the
AL1 or AL2
button to confirm and the minute digits will flash.
4. Follow steps (2) and (3) to set the minutes.
Setting the alarm mode
5. After setting the alarm time, the alarm mode option will flash. Select a source
using the
buttons: Buzzer “ ”, “Radio”, “CD” or “iPod”.
Enabling/ Disabling the alarm function
6. Press and hold
AL1 or AL2
to enable or disable the alarm function.
7. When the alarm function is on, the buzzer or music will come on at the set
time.
8. To stop the alarm, press the
AL OFF
button. The alarm will sound again at the
same time the next day.
9. To disable the alarm function, press and hold
AL1 or AL2
.
/
/
