GB 1
PRECAUTIONS
Follow the instructions below to ensure the product is used safely and correctly.
PLACEMENT
. Do not use the unit in places which are extremely hot, cold, dusty, or humid.
. Place the unit on a flat and even surface.
. Do not restrict the airflow around the unit by placing it in a place with poor ventilation, covering it
with a cloth, or placing it on a carpet.
. Do not place the unit close to heat sources.
. Use the unit only in moderate climates (not in tropical climates).
. Do not expose the unit to rain or splash with water.
. Do not place objects filled with liquids such as vases on the unit.
SAFETY
. When connecting and disconnecting the AC power cord from the AC mains outlet, pull the plug
and not the cord itself. Pulling the cord may damage it and may be dangerous.
. The mains plug must remain easily accessible.
. When you are not going to use the unit for a long period of time, disconnect the AC power cord
from the AC mains outlet.
AC VOLTAGE
. Before use, check that the rated voltage of your unit matches your local voltage.
CONDENSATION
. The unit may not work properly if it has condensation inside.
. Unplug the unit for 1 to 2 hours before turning the power back on, or gradually heat the room up
and dry the unit before use.
. Ensure a minimum space of 5 cm around the apparatus for sufficient ventilation.
. Do not cover the ventilation openings.
BATTERIES
. Pay attention to the environmental aspects of battery disposal.
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting
it from mains supply.
ATTENTION :
To reduce the risk
of electric shock, do not remove
the cover. There are no user
serviceable parts inside the unit.
Refer all servicing to qualified
personnel.
The exclamation mark within
a triangle is a warning sign
alerting the user to the
presence of important in
-
structions accompanying the
product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an
arrowhead symbol within a
triangle is a warning sign
alerting the user to the
presence of “dangerous
voltage” inside the unit.
