Scott Safety Protege, Руководство пользователя

Страница: 71 / 104

Maintaining the Device
47
SCOTT SAFETY 087-0038 REV L
•
Canned compressed air (Electronic Grade)
1
Using the T8 Torx head driver, remove the four (4) Torx head screws located on the
back of the pump assembly. See
Figure 34 .
Figure 34 Removing Pump Screws
2
Lift the back cover off the pump enclosure and remove the pump retaining plate.
This allows access to the pump. Gently lift the pump out of the pump enclosure.
See
Figure 35 .
Figure 35 Disassembly of Pump
3
Carefully remove the tubing from the pump ports.
Caution: Use only the minimum force necessary to remove hoses from ports. Pump
ports break easily if excessive force is used.
To easily identify hoses for reinstallation, attach locally generated labels to the hoses.
The short hose is the OUTLET and the long hose is the INLET.
See Figure 36 .
Pump Retaining
Plate
Pump Access Back Cover