Scott Safety HushAir Connect 7500, Руководство пользователя

Страница: 47 / 120

Using the Compressor HMI
25
SCOTT SAFETY 087-0067 REV A
Using the Compressor
HMI
The HMI has a compressor screen that displays a color-coded quick view of the
system and provides access various functions. See
Figure 10 .
Figure 10 HMI Compressor Screen
•
Auto - The compressor may be operated in one of two modes. The modes are
Automatic or Manual. In the Auto mode, the compressor starts and runs until the
pressure switch is tripped at 7000PSI and the automatically restarts when the
pressure drops to 6200PSI. The cycle is repeated.
•
Manual - In the Manual mode, the compressor starts and runs until the pressure
switch is tripped at 700PSI.
•
Stages - Displays the current pressure of the compressor. Specifically the stage 1 to
stage 5.
•
Temperature - Displays the current readings of the crankcase and air.
•
Operation - Displays the current reading of the oil pressure.
•
Maintenance - Displays the purification hours remaining.
•
Sensors - Displays the current reading of the dewpoint and CO.
•
Run - Starts the compressor.
•
Stop - Is used to manually shut down the compressor in an orderly manner. When
activated, the cool down cycle of the compressor, if needed and then power down
the remainder of the system.