Initial Start Up & Use
Final Check List
1. Is the ice machine properly installed?
2. Is the dispenser level?
3. Has the water supply been connected to the ice
machine?
4. Has the proper electrical power been connected
to both the ice machine and the dispenser?
Note: When electrical power is supplied to the
dispenser the rotor will rotate slightly.
5. Have the drain lines been connected and are
they separate from the ice machine?
Initial Start Up
1. Locate key and unlock the sink.
2. Remove sink.
3. Locate on-off switch, move it to the ON position.
4. Return sink to its
original position.
5. Simulate a vend.
The rotor should move
1/6 of a revolution on
push button machines
and a full revolution on
coin vending
machines.
6. Record the ice machine model
and serial number on the last page
of this manual and on the warranty
registration form.
Mail the form to Scotsman
Operational Note: Every 6 hours the rotor will
be activated to agitate the ice. This may result
in some ice in the chute.
How to Use - Push Button
The ice machine will start and run periodically to
maintain the ice in the dispenser’s hopper.
Push the “Ice” button to fill the clear plastic chute
with ice.
Push down on the
chute to release the
ice into a waiting
container.
Allow the chute to
return all the way up
to its at-rest position.
Note: If the chute is
not all the way up, the
unit cannot resupply
the chute with ice.
How to Use - Coin Vending
The ice machine will start and run periodically to
maintain the ice in the dispenser’s hopper.
Insert one U.S. quarter or a special token (available
from Scotsman). The unit will fill the ice chute with
ice.
Push down on the chute to release the ice into a
waiting container.
Allow the chute to return all the way up to its at-rest
position.
Note: If the chute is not all the way up, the unit
cannot resupply the chute with ice.
How to Use - Room Card
The ice machine will start and run periodically to
maintain the ice in the dispenser’s hopper.
Insert room card into slot in the front of the
dispenser, and push the vend button. The unit will
fill the ice chute with ice.
Push down on the chute to release the ice into a
waiting container.
Allow the chute to return all the way up to its at-rest
position.
Note: If the chute is not all the way up, the unit
cannot resupply the chute with ice.
Key
ON-OFF
Switch
HD356
June 1998
Page 7
