Proper Combinations:
The three sub systems are designed to be
connected together in certain combinations to
meet the user’s needs:
Eclipse 1400 System:
·
EH430, C1410CP, ERC1086
Eclipse 1800 System:
·
EH430, C1800CP, ERC2086
Eclipse 2000 System:
·
EH430, C2000CP, ERC2086
ERC coils may be substituted for by an approved
UL listed central condenser coil & fan (coil must be
without headmaster - headmaster is part of CP).
ERC1086 condenser coil internal volume target is
165 cubic inches, BHTU target is 42,000 BTUH.
ERC2086 condenser coil internal volume target is
209 cubic inches, BTUH target is 48,000 BTUH
Note: The ice making section cannot be stacked
vertically.
Accessories such as bin adapters and tubing kits
are required to complete the installation.
Dispenser Adapter Kits:
·
Scotsman ID200 or ID250:
KBT44
Note: Dispensers with two rotors. the ice making
head should NOT be centered left to right between
the two rotors. It should be shifted slightly to one
side, and the agitation should be minimized.
Bin Adapter Kits:
·
B842: KBT29
·
B948: KBT22
Tubing Kits:
·
20 foot:
3RTE20-EH
·
35 foot:
3RTE35-EH
·
50 foot:
3RTE50-EH
·
75 foot:
3RTE75-EH
·
Suction Line Trap:
KSLT075
·
Interconnecting Tubing to Approved Rack
Condenser Coil:
RTE10
·
Line end kit:
KTE6-EH
Items required for installation:
·
Ice making section
·
Compressor Package (includes interconnecting
control system wire)
·
Remote condenser
or
approved rack coil
w/tubing kit
·
20’, 35’, 50’ or 75’ triple line set (liquid, vapor
and suction)
·
Bin or dispenser adapter
Special Considerations
The ice making section’s footprint is 30” wide by
24” deep. The refrigeration connections can be
made out the top panel or out the back. The
electrical power cord and the water inlet line can
also be routed through either of those areas. The
drain may be routed out the back or to the left side.
Water
Pure water does not exist. All water supplies
contain some amounts of impurities, although
potable water is, by definition, fit for human
consumption. Because the contents of the water to
an ice machine directly impact its performance,
consideration should be given to improving the
water’s quality.
There are two ways water can contain impurities:
in suspension or in solution. Suspended solids can
be filtered out of the water. In solution or dissolved
solids must be diluted or treated. Water filters are
recommended to remove the suspended solids.
Some filters or filter systems have treatment
chemicals in them for treating the suspended
solids.
This ice machine has an adjustment for the
amount of water rinsed or purged. Water use
adjustments are customer convenience
adjustments; they are not factory defects and are
not covered by warranty.
Prodigy Eclipse
ä
1400,1800, 2000
March 2008
Page 7
