�
guide
as
shown below.
0
e
Remove
the white
Line up the
corresponding
arrows on the
Template Guide to
the to the bottom of
your phone.
8
When
positioned,
press plates
firmly to affix
0
When
firmly to affix � ;;;.-:::
,
e>
PARTS INCLUDED
1.
(1) Direct Fit Bezel w/ MQUSM
2. (1) Vehicle Specific T-harness
3. (2) MAGICPLATE'"
4.
(2) MAGICPLATE'" Applicator
5. (6) Double-sided Adhesive
MAGICPLATE'" MOUNTING OPTION 1
NOTE:
For mounting directly to device, use the large single plate with template guide
as
NOTE:
For mounting directly to CASE, use the (2) small plates with the integrated template
shown in the instructions below.
�move
,
the white
paper backing
.
····•......
. )
.·
.
from both plates
·
·
.
······ .
.
e
Line up the
corresponding
arrows on the
Template Guide to the to
the bottom of your phone.
MAGICPLATE'" MOUNTING OPTION 2
8
When
positioned,
press plates
firmly to affix
and remove
template.
REMOVING THE PLATE
Use a thin plastic card to carefully lift the plate's adhesive surface from
the mounting surface. Slowly lift up and remove the plate.
Do not
use any heat or liquids to remove the plate, due to risk
of
damaging your phone. Contact Scosche Customer Service for any
additional assistance at 800.363.4490 Ext.
1 or customerservice@
2