2
VEHICLE DISASSEMBLY
2006-Up Mazda Miata / MX5
RADIO REMOVAL:
1. Remove plastic knee guard panel.
2. Extract bolts securing knee guard panel.
3. Extract 1 hidden Phillips Head Screw securing side of radio.
4. Unsnap lower side trim panel on each side of the radio by pulling back on them and unsnap them.
5. Extract 1 Phillips Head Screw securing factory radio on each side.
6. Using a Panel Removal Tool, unsnap the parameter of the radio. Lift away disconnect and remove.
MOUNTING THE RADIO
DIN MOUNT
1. Slide pocket into kit panel from front until it snaps into place.
2. Next, slide DIN sleeve into kit panel from front and bend tabs
to hold into place.
3. Insert radio into sleeve until it snaps into place.
DIN RADIO
DIN MOUNT
REAR
SUPPORT
STRAPS
6228
KIT PANEL
6248
POCKET
RADIO
MOUNTING
SLEEVE
6247 DIN
TRIM RING
BEND TABS
OUTWARD
NOTE:
REAR SUPPORT AVAILABLE
SEPARATELY. REAR
SUPPORTING THE RADIO
ADDS TO THE INSTALLATION’S
STRUCTURAL INTEGRITY.
ISO MOUNT
1. Slide pocket into kit panel from front until it
snaps into place.
2. Slide left and right brackets into their
corresponding slots in kit panel.
3. Mount radio to brackets with radio supplied
screws.
4. Snap trim ring into
place.
DOUBLE DIN MOUNT
1. Slide left and right double DIN brackets into
their corresponding slots in kit panel.
2. Mount radio to brackets with radio supplied
screws.
3. Snap trim ring into place.
DOUBLE DIN ISO MOUNT
ISO MOUNT
6247
DIN
TRIM
RING
6248
POCKET
6228
KIT PANEL
5742R
BRACKET
5742L
BRACKET
DIN RADIO
6246
DOUBLE DIN
TRIM RING
5908
DOUBLE DIN
ISO BRACKET
5908
DOUBLE DIN
ISO BRACKET
6288
KIT PANEL
REAR
SUPPORT
STRAPS
DOUBLE DIN RADIO
3
MOUNTING A/C CONTROLS
1. Retain factory A/C controls and factory screws to be mounted onto panel.
2. Align A/C control unit and insert into panel. (Use factory screws)
3. Using factory screws, attach A/C unit to panel.
A/C CONTROL UNIT
6288
KIT PANEL
FACTORY A/C
CONTROL UNIT
*
*
*
*
USE FACTORY SCREWS
*
Choose Scosche products if you’re looking for a quality sound.
