Remote control operating instruction:
1. It can choose the channel by press the numeric key directly.
For example, if setup the FM to 87.5MHz, only need to press the numeric key 8,7,5,
then press “ENTER” to set to this frequency;
2. Press the key “M” to enter into memory state, you can press“
”to
adjust the channel and press “M” to store it. But if you want to use the numeric
key for adjusting and storing. You should press the key “ENTER” :
For example, If the channel 1 is 89.9, and you want to change it to 107.9, You
need press the numeric key 1,0,7,9 then press the key “ENTER” for storing this
frequency.
3. The key“
” on the remote control has same function with on the
transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTE
：
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
