MOUNTING THE AFTERMARKET STEREO
1. After removing specified tabs, snap mounting brackets to trim panel as shown.
2. Slide Double-DIN head into back of kit. Align screw holes with mounting slots on
brackets, and secure in place using screws supplied with aftermarket stereo.
DOUBLE DIN INSTALLATION (FIGURES 1-6*)
CUT AT SCORE LINE AND
DISCARD SHADED PORTION
(BOTH BRACKETS)
FIGURE 1
CUT OFF AND DISCARD ALL
SHADED TABS (BOTH BRACKETS)
7022 MOUNTING
BRACKET
7021 MOUNTING BRACKET
7019 TRIM
PANEL
*BEFORE BEGINNING:
Refer to Factory Stereo Removal section (pgs. 6-8) to
determine the proper kit configuration for your vehicle.
USE 7023 & 7024 SPACERS
(BOTH BRACKETS )
NOTE:
WHEN USING SPACERS
ATTACH KIT TO VEHICLE DASH
WITH SUPPLIED BLACK SCREWS
AFTERMARKET
DOUBLE-DIN
STEREO
CUT AT SCORE LINE AND
DISCARD SHADED PORTION
(BOTH BRACKETS)
FIGURE 2
CUT OFF AND DISCARD ALL
SHADED TABS (BOTH BRACKETS)
7022 MOUNTING
BRACKET
7021 MOUNTING BRACKET
7019 TRIM
PANEL
USE 7023 & 7024 SPACERS
(BOTH BRACKETS)
NOTE:
WHEN USING SPACERS
ATTACH KIT TO VEHICLE DASH
WITH SUPPLIED BLACK SCREWS
AFTERMARKET
DOUBLE-DIN
STEREO
FIGURE 3
AFTERMARKET
DOUBLE-DIN
STEREO
CUT AT SCORE LINE AND
DISCARD SHADED PORTION
(BOTH BRACKETS)
CUT OFF AND DISCARD ALL
SHADED TABS (BOTH BRACKETS)
7021 MOUNTING BRACKET
7022 MOUNTING
BRACKET
7019 TRIM
PANEL
