156
©
2000 SCOSCHE INDUSTRIES, INC. ALL RIGHTS RESERVED
FOR MORE INFORMATION VISIT
www.scosche.com
OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTE
ACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCE
GUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY OCCUR
.....
2001 Honda Civic
Sedan
PRELIMINARY: Disconnect the negative battery cable.
ANTENNA: The factory antenna is located rear window.
RADIO REMOVAL AND IN-DASH INSTALLATION:
Note: The factory stereo provision is for a DINandHalf
radio with a pocket. When installing an aftermarket
DIN size radio, a dash installation kit is needed. We
recommend the Scosche HA1567B installation kit.
1.
Using panel removal tool, pry out lower dash panel
pocket, unplug and remove.
2.
Exract (2) Philips screws from bottom of radio bezel
assembly.
3.
Pry out radio bezel assembly, disconnect and remove.
FRONT DOOR SPEAKER REMOVAL AND INSTALLATION:
Note: The factory speaker provision is for a 6 1/2" speaker
mounted to a factory adapter. When installing an
aftermarket 5 ¼ or 6 ½” speaker no adapter is
required.
1. Using small pick, pry off screw cover in interior door handle
and extract (2) Philips screws, remove handle.
2. Remove window triangle using panel removal tool.
3. Using panel removal tool, pry off cover on bottom of door
pulland extract (2) Philips screws.
4. Pry off door panel by pulling out then up, disconnect and
remove.
5. Push in on tabs of speaker adapter to release, disconnect
speaker and remove.
REAR SPEAKER REMOVAL AND INSTALLATION:
Note: The factory speaker provision is for a 6 ½”
mounted to the factory metal. When installing an
aftermarket speaker a speaker adapter is not required.
1.
Fold rear seats down, pull back weatherstripping on B
pillar panels and remove.
2.
Remove outer seat sections by extracting (2) 10 mm
bolts and pulling up.
3.
Pull up and out on rear deck to remove, disconnect
third brake light.
4.
Extract (3) 10 mm bolts from speaker, disconnect and
remove.
Note: Screws accessed through lower panel.
