FAQs
1. Why the receiver can not paired with phone?
Please make sure the receiver is in pairing mode.
The pairing mode will last 2 minutes, it will enter standby mode
automatically if overtime.
Disconnect the receiver and socket, and reconnect them, after the receiver
turned on, it will enter pairing mode automatically.
2. Why it can not connect with phone automatically after over range
and come back?
If it over range, you should come back in 5 minutes, and them the receiver
will connect with phone automatically. If over 5 minutes, you can connect it
by operate your phone.
Specifications
Bluetooth version
Bluetooth V2.1+EDR
Bluetooth profiles
A2DP
Operating distance
Up to 10meters
Power supply demand
AC100~240V
USB output
DC 5V
1A MAX
Dimension
38.5*38.5*67.5mm
Weight
About 43.8g
ambient temperature
4
0℃ MAX
Notes:
FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.