SCORPION Exo-R410, Техническое руководство, Страница: 8 / 12

7
Cleaning Your Helmet System
FaceShield Replacement
Securing and Wearing your Helmet
RATCHETING SYSTEM
To remove your faceshield, place the helmet in front of you with the eye
port facing away. Ratchet the faceshield up to the fully open position.
Using both hands, push up the Y shape release latchet upward and the
shield is able to release out of locking mechanism. Than, with both of your
thumbs pushing squarely on the center of the Ellip-Tec™, gently pull or
“peel” the faceshield away from the helmet.
IMPORT NOTE:
Be sure to latch up the
“Y” release latchet
while removing the
faceshield!
Continued on pg. 9 >>
FIRMLY AND SECURELY FASTEN YOUR CHINSTRAP.
Check your chinstrap for tightness occasionally as vibration or wind may
loosen it.
Do not simply pull your helmet down onto your head like a hat. Your Scorpion-
Exo™ helmet should be worn as follows: Using both hands grab the helmet’s
bottom rim while holding the chin straps with your thumbs. Then “roll” the
helmet onto your head starting at the forehead. Continue rolling the helmet on
towards the back of the head until it comes to rest with your head fully in
contact with the inner lining and cheek pads.
HOW TO USE CHINSTRAP
8
Emergency Release System
Locate the emergency labeling on the
neck roll. Simply reach under the
neck roll and grab the release strap,
pull at a 45 degree angle towards
front of helmet. The cheek liner will
easily release from the helmet.
This
system should only be used by
trained medical personnel.
Emergency Safety Release System
DO NOT ATTEMPT TO RELEASE WHILE RIDING
IN CASE OF ACCIDENT DO NOT ATTEMPT REMOVAL ON YOUR OWN
SNAP
PUSH
SNAP Slot
PULL
Cheek Pad
SNAP
PUSH
SNAP Hole
PRECAUTION
1. SNAP may come off from the Cheek Pad
during Cheek Pad removal.
2. Locate the separated SNAP and reassemble
on to the Cheek Pad by pushing the SNAP into
the SNAP Slot on the Cheek Pad.
3. Align SNAP on the Cheek Pad to the SNAP
Hole and push the snap in until sound is heard.
1
2
3
!