PART NO.
FIT KITS
FEATURES
BIKE
YEAR
NOTES
scorpion-exhausts.com
FITTING INSTRUCTIONS 2/3
HONDA CBR 1000 RR
2008 - ON
Bung and copper washer to be replaced by OE lambda
probe. (not applicable to non catalyst models)
EHA - 95
EHA - 95
DB KILLER Z038.10127
Box: PLOCK 1
A) Remove 2 x side panels to allow
seat to be removed.
B) With seat removed you can now
gain access to unbolt the servo, DO
NOT DISCONNECT SERVO.
C) You can now disconnect the
servo cable, and then re-fit the
servo unit.
D) To allow access unbolt lower
fairing on left hand side of bike,
this will then allow you to remove
the lambda sensor.
E) Undo the clamp holding the O.E
exhaust silencer.
F) Remove the bolt holding O.E
silencer to footrest.
G) The O.E silencer now can be
removed from the bike.
H) Take the supplied heat mat and
fit inside of the fairing.
CONTINUED FROM OVERLEAF:
B
C
D
E
F
G
H
A