ScopeDome.com
2010 Slupsk - Poland
A
B
C
E
D
G
B
E
D
A
page 2
Fig. 2 - Dome's diagram view from above
A. Left side wall panel
B. Right side wall panel
D. Back panel
E. Shutter
EN
How to start?
F
Assembly preparation.
View instruction photos
from attached CD-Rom.
Action Order.
Tools required
to set-up the dome:
1. Make sure you have all dome's parts
2. Prepare the place for dome's assembling. You will
need a flat place, approx. 5.0x5.0m.
1. Read this manual understandingly.
2. Set-up base ring.
3. Screw together rotating parts of the dome (both
sides, front and back panels).
4. Place the dome onto base ring.
5. Fit the shutter.
6. Check if the dome turns round loosely, and if the
shutter is opening and closing easily.
7. Fit cog-rim for cog-wheel drive.
8. Fix rotary drive shield.
9. Fit rotary drive and shutter motor, Home Sensor, the
encoder, encoder's cleaning tape, limit switches,
inverters, shutter cable box and ScopeDome card.
10. Connect all elements according to diagram.
11. Check limit switches action
12. Install dome's drive software.
1. Automatic screwdriver with x-shaped ending
2. A small screwdriver with flat ending
3. Knife or scissors for cutting wires
4. Inbus keys set
5. Hex keys, screw keys set
6. Driller and drills
7. Universal meter
and suitable tools.
Each photo is worth more then thousand words.
Lock through photos before assembly.
They can be found at:
"Assembly instruction
photographs"
An additional person to help is required when fitting-up
the dome.
If you plan to mount the dome on the base ring manually,
you will need the assistance of four strong adults.
Fig. 1 - Dome's diagram front view
A. Left side wall panel
B. Right side wall panel
C. Front panel
D. Back panel
E. Shutter
F. Shutter securing holders
G. Base ring
