PRX4 & PRX4SERL Four Zone Receiver Decoder
Ref: RX4USER
Page 2 of 8
Issue 1
PREFACE
Important Installation Information
It is the purchasers’ responsibility to determine the suitability of this equipment and its
derivatives for any given application, Scope cannot give specific advice in this manual,
as each use will require independent evaluation.
Scope has, wherever possible, employed extra safeguards to monitor the system’s
performance. Certain system installations, operational requirements or budgets may,
however, limit the effectiveness of these safeguards. Again, the suitability of the system
for any given application must therefore be decided by the installer and their customer,
relative to the application and risk.
Good working practice dictates that a suitable system installation log must be
generated, together with a record of the dates when the system has been manually
checked, (with the aid of signal strength meters etc.) enabling the system performance
to be compared with the original installation data.
For UK equipment, Scope has no control of the use and application of the frequencies
issued by OFCOM. Some equipment that is licensed may have greater protection than
other equipment which is operated on a WT Act License Exempt basis.
The supply of this equipment is governed by our standard terms and conditions of sale,
which can be found on the reverse of all order acknowledgements*, proforma invoices*,
delivery notes, price lists and invoices. Alternatively, these can be provided on request.
* Faxed proforma invoices and quotations refer to “conditions available upon request”.
Important Safety Information
Scope products are designed to operate safely when installed and used according to
general safety practices. The following requirements should be observed at all times.
Do NOT subject this equipment to:
Mechanical shock, excessive humidity or moisture, extremes of temperature or
corrosive liquids.
This equipment is designed for indoor use, unless expressly stated otherwise, and must
not be used in classified Hazardous Areas, including areas containing explosive or
flammable vapours, unless express authorisation has been given in writing by the
manufacturer. If in doubt, consult your local product dealer for further information.
Do not obstruct any slots or openings in the product. These are provided for ventilation
to ensure reliable operation of the product and to protect it from overheating. Only use a
damp cloth for cleaning (not liquid or aerosol based cleaners), and ensure that any
power is removed from the unit prior to beginning the cleaning operation.
Removal of covers from the equipment must only be undertaken by authorised service
personnel, who must ensure that power is isolated prior to removal.
