background image

IMPACT MK3 Hand Held UHF Paging Transmitter

 

 

HHTXMK3  

Issue 

 

3

 

 

No User Serviceable Parts

 

 
Alteration or modification to any part of this equipment, without the prior written consent of the 
manufacturer Scope, will invalidate all Approvals and Warranties attaching to the equipment. Further 
liability for the operation of the equipment, under the applicable law, will pass to the user, who will 
absolve the manufacturer of any further responsibility for it’s correct operation and use. 
 

Liability 

 
Scope does not accept liability for any damage or injury, howsoever caused as the result of misuse of 
this equipment. It is the responsibility of the user to ensure that the equipment is operated in the manner 
for which it was intended and that it is the correct item of equipment for the required task. 
 

Warranty 

 
This product is warranted as free from defects of workmanship and materials for a period of one year 
from the original purchase date. During this time, if there is a defect or malfunction of this product, Scope 
will, with proof of purchase, repair or replace at it’s discretion any defective parts, free of charge. This 
does not include where the adjustments, parts and repair are necessary due to circumstances beyond 
the control of Scope, including but not limited to fire or other casualty, accident, neglect, abuse, abnormal 
use or battery leakage damage. 
 
 

WARNING  ! No User Serviceable Parts  

Celui-ci ne contient aucune piece pouvant etre reparee par l’utilisateur 

 

Caution ! Risk of electric shock, do not open. 

Attention ! Risque de choc electrique, ne pas ouvrir. 

 
Alteration or modification to any part of this equipment, without the prior written consent of the 
manufacturer, will invalidate all manufacturer approvals and warranties.  No adjustments can be 
undertaken except by qualified and licensed persons as authorised by Scope. 

 

 

WARNING ! SAFETY 

 
The AC adaptor provided with this equipment must only be used with an Approved mains cord 
set rated at 5A minimum which is fitted with an integral three prong, grounded mains plug and a 
moulded IEC320 style socket. The cord set must only be plugged into a grounded, fused outlet 
rated 5A minimum. 
 
 

This product complies with the essential requirements of the R&TTE Directive 1999/5/EC, the EMC 
Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the 
European Community. 
Copies of the Declaration of Conformity covering this product can be obtained from Scope at:

 

Quantum 

House, Steamer Quay, Totnes TQ9 5AL United Kingdom. 

 

Do not discard.  At end of life this equipment must be sent to an authorised waste treatment centre. 

Contact Scope at the above address for further details. 

 

 

© Scope Communications UK Ltd, 2006 All Rights Reserved

 

 
 
 
 

Содержание Impact Mk3











Отзывы: