PAGE 9
4
ASSEMBLY
Step 5:
Once the base tube has been fully secured,
lift the main body from the foam packaging
and place it on the floor as shown.
Step 6:
Taking one pedal at a time, slide the pedal
onto the shaft as shown in Fig 6 below.
After sliding the pedal onto the shaft, press
the dome-shaped C-clip as shown onto the
end of the shaft until it is secure. When the
C-clip is fully secured, there will be a click sound.
Test the pedal by pulling on it to determine whether it is locked in place by the C-clip.
5
6
Dome-shaped C-clips
SC100 11-19.indd 9
11/11/2019 11:06
