2
Signal Range
1
RFJA-12B - Shutter/Blind/Curtain Receivers
Receivers can be mounted directly behind individual appliances, control circuits locally or within the consumer
unit. We recommend the receiver is installed inside a non-metallic enclosure.
Receivers will have the programme button set back in to the housing, this is normal. A thin blunt implement
e.g. stylus can be used to press and hold the programming button.
We recommend noting the hexadecimal code printed on each receiver and the appliance it is controlling for
potential future use.
Ensure the correct type of receiver is selected to prevent damage to the motor or receiver
The shutter receivers must only be used in conjunction with motors with in-built limit switches
Each receiver can be controlled by up to 25 transmitting devices
RFJA-12B/230V
Provides 230V~ output controlling the motor one way or the other.
Must only be used in conjunction with motors with in-built limit
switches.
RFJA-12B/24VDC
Requires 12V to 24V DC input which will also supply the output voltage.
The motor must be reversible.
Must only be used in conjunction with motors with in-built limit switches.
Installation of receiving devices should be carried out by a qualified electrician.
Any device with the signs of damage and/or missing parts should not be installed and should be returned
to the seller.
Before attempting installation, ensure all associated circuits and cables have been isolated at the source.
Please refer to ‘installation guidance notes’ supplied before commencing with the installation.
Devices are designed to be mounted internally only.
Both RFJA-12B receivers has a signal range in free air of up to 100 metres.
Once the signal penetrates building materials etc. the signal range will be reduced. See the installation guidance notes supplied
with this device.
3 Wiring
12V to 24V DC input
Same input voltage
supplied to motor
Supply
230V~
Neutral
Live
Ensure the correct type of receiver is selected to
prevent damage to the motor or receiver
The shutter receivers must only be used in
conjunction with motors with in-built limit switches
www.click-smart.com