Scodix Ultra Press, Руководство по профилактическому обслуживанию

Страница: 20 / 26

16 of 22 Chapter 3 – Operator Maintenance Procedure Details
Verify the following:

The belts show no wear and tear.

The belts are centered and stable.

The Engine belt stitch area is smooth.

The Engine belt covers the external line of vacuum holes (see following illustration) on each side.

The Foil Station infeed sensors' red lights are centered in the conveyor belt cut-outs.
If the conveyor belts' condition is not as required, call your service representative.
Cleaning the OPA Bridge Encoders and Camera
Encoders
Once every three months, using a lint-free cloth, clean the OPA bridge encoders, camera encoders, and
camera lenses.
Important:
To prevent damaging the cameras during cleaning, perform this procedure first thing in the morning
after startup, when the cameras' position does not interfere with accessing the center of the machine.
Example of bad
position:
Vacuum holes
are not covered