Scitec Aegis 5S-c, Руководство пользователя

Страница: 9 / 11

2) Press
DEL
. “
DELETE CALL ?
” will be displayed on the LCD.
3) To cancel without deleting the selected entry, press
▲
or
▼
4) To continue deleting the selected caller ID entry, press DEL .
Deleting all Caller ID entries:
1) Press the
▲
or
▼
to display any caller ID entry.
2) Press and hold DEL for at least 3 seconds, until the LCD displays
“
ERASE ALL CALL
?”
3) To cancel without deleting any calls, press either
▲
or
▼
.
4) To continue deleting all entries, press DEL . All entries will be
deleted and “
NO CALLS
” will be displayed on the LCD.
Dialing using a Caller ID entry:
On-hook:
1) Press
▲
or
▼
to select the caller ID entry to be dialed.
2) Press
DIAL
. The LCD will display “
PICK UP OR ADJ
” for 10 digit
numbers, or “
PICK UP PHONE
” for 7 digit or 11 digit numbers.
3) To adjust the phone number, press DIAL . For instance, a 7-digit
local number sometimes cannot be dialed because it requires a
10-digit or 11-digit format. Press
DIAL repeatedly to scroll
through the 7, 10, and 11-digit numbers.
4) To dial the displayed number, pick up the handset or press SPKR .
The LCD will display “
DIALING ...
” and the number will be
dialed automatically.
Off-hook:
With Local Area Code programmed:
1) Select the telephone number variation to be dialed using the
▲
and
▼
keys.
2)
If the displayed number is 10 digits, press the DIAL and the LCD
will display “DIALING ...”. The selected 10 digit number will be
prefixed with a “1” and dialed automatically.
3) If a prefixed “1” is not desired, press and hold the DIAL key for 2
seconds. The LCD will display “
DIALING...
” and the 10 digit
number will be dialed automatically.
4) If the displayed number is 7 digits, no adjustment can be made.
With Local Area Code not programmed (default setting “- - -”):
1) Press
▲
or
▼
to select the number to be dialed.
2) If the displayed number is 10 digits, press DIAL . The LCD will
display “
DIALING...
” and the 10-digit number will be dialed
automatically.
3) To prefix the 10 digit number with a “1”, press and hold the DIAL
key for 2 seconds. The LCD will display “
DIALING ...
” and a “1”
followed by the 10 digit number will be dialed automatically.
4) If the displayed number is 7 digits, no adjustment can be made.
*Note: If necessary, you may reset the user programmable menu options to the
original factory set by disconnecting the telephone line, pressing and holding the
▼
and
DIAL
keys simultaneously, connecting the telephone line, then releasing both
keys after 2 seconds. All user options will be set to defaults and all the contents of
Caller ID messages and speed-dial memory keys will be cleared.