STANDARD SERIES USER GUIDE
www.scitecinc.com
5
This telephone user guide details installation,
programming, and operation instructions for
industry standard telephone models. Please refer
to the Scitec website (www.scitecinc.com) for
updates to this and other Scitec products.
205TMW
Package Contents
• Telephone base unit
• Handset
• Coiled handset cord
• Straight line cord
• Short line cord
Installation
Each telephone is designed for use behind a
registered PBX system. The telephone user or
system installer must supply an RJ-11 modular wall
jack to connect this telephone to the PBX system.
The PBX station port type must be Industry Standard
Analog or POTS. This telephone cannot be used
with digital PBX station ports. Insert one end of the
coiled handset cord into the jack on the BOTTOM
END of the base unit. Insert the other end of the cord
into the jack on the BOTTOM END of the handset.
The handset of the unit should now be placed into
the base of the unit. Connect the straight line cord
from the wall jack to one of the line jack located
underneath the base unit. Lift the handset. A dial
tone should be heard in the receiver.
Attaching the Handset
Connect the supplied coiled handset cord between
the jack on the end of handset and the jack marked
with a handset symbol on the left side of the telephone
base unit. Place the handset on the telephone base
unit or if wall-mounted, hang it on the desk/wall-
mount clip to depress the hook switch.
Wall-Mounting
• The wall/desk handset clip located on the
front of the phone. In its wall-mount position,
the clip extends up to hold the handset in
place. Gently pull it up and turn half a turn to
change from desk to wall mount. This clip is
spring-loaded and not removable, so that it
cannot be lost.
• Turn the telephone over so the telephone face
is down.
• Connect line cord to the jack on rear of phone.
• Hold telephone in front of the two mushroom
shaped mounting posts on the wall jack
plate. Line up keyholes on wall-mounting
bracket with posts. After engaging wall-
mounting bracket with posts, slide telephone
down slightly. When properly installed, the
telephone will be firmly attached to the wall.
Features
RINGER VOLUME—
Adjusts ringer volume to
LOW or HI. Located on the left side of the phone
near the dataport.
HEARING AID-COMPATIBLE HANDSET—
ADA/HAC-compatible.
HANDSET JACK—
Modular jack to connect
coiled handset cord from handset to telephone.
DATA PORT—
Provides access to the telephone
line for optional connection of modem, fax, or
answering machine. Located on the left side of
the phone near the ringer control.
DIALING KEYS—
0–9 dialing keys.
VOLUME SWITCH—
Volume control switch on the
handset steps through the three available handset
volume levels [Normal to Medium to High].
VISUAL RING INDICATOR—
Indicates phone is
ringing or a message is waiting. Responds to
NEON/90V message waiting light format.
Operation
To Place a Call
Lift the handset, then dial the number desired.
