9.2. Setting PC for Static IP Address
1. On your PC, go to
Control Panel > Network and Internet > Network Connections > Local Area
Connections
, right click on it and choose
Properties
.
2. In the “Local Area Connections Properties” dialogue box, double click Internet Protocol Version 4
(TCP/Ipv4).
3. In the “Internet Protocol Version 4(TCP/Ipv4) Properties” dialogue box, select “Use the following IP
address”.
4. Insert the IP address 169.254.23.30 and subnet mask 255.255.255.0
5. Click “OK”.
6. Your PC is now ready and can be connected to the transmitter or receiver.
Local Area Connection Properties
Networking
Connect using:
Cancel
OK
X
Install…
Realtek PCIe GBE Family Controller
Configure…
This connection uses the following items:
Client for Microsoft Networks
QoS Packet Scheduler
Internet Protocol Version 6 (TCP/Ipv6)
Internet Protocol Version 4 (TCP/Ipv4)
Uninstall
Properties
Description
Transmission Control Protocol/Internet Protocol. The default wide
area network protocol that provides communication across
diverse interconnected networks
User Manual
Scion Tech
SC08.MX600
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
Page 8
Internet Protocol Version 4 (TCP/Ipv4) Properties
General
Cancel
OK
X
Advanced…
You can get IP settings assigned automatically if your network
supports this capability. Otherwise, you need to ask your network
administrator for the appropriate IP settings.
Use the following IP address:
Obtain an IP address automatically:
IP address:
169 . 254 . 23 . 30
Subnet mask:
255 . 255 . 255. 0
Default gateway:
169
.
254
.
23
.
30
Use the following DNS server addresses:
Obtain DNS server address automatically
Preferred DNS server:
169
.
254
.
23
.
30
Alternate DNS server:
255
.
255
.
255
.
0
Validate settings upon exit