5. Front Panel Description
User Manual
Scion Tech
SC01.7060
Page 4
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
0
0
1
EDID
1 2
HDMI Out
HDMI In
CAT5e Out
IR Out
FW
DC/12V
5
1
2
3
4
6
7
Number
Name
Function / Description
1
EDID Switch
The transmitter has default integral EDID and the ability to copy EDID. Defaults
include 4K/60Hz and 1080P/60Hz.
2
HDMI Out
Looped HDMI output for connection to a local screen.
3
HDMI In
Connect the HDMI source device using a Premium High Quality HDMI cable to
achieve the best results.
4
CAT5e/6 Out
Connect to CAT5e/5 cabling. This connection must be end to end and not include any
network products such as routers or switches. Connecting to these devices will cause
damage to both the transmitter and receiver.
5
Firmware
Used for firmware upgrades only.
6
IR out
Connect the IR Emitter cable and place the emitter over the source device IR sensor.
7
DC Jack
Connect the 12V power supply (PoC - only needs 1 x PSU at either end)
6. Rear Panel Description
CAT5e In
IR In
FW
DC/12V
HDMI Out
Analogue Toslink
Output
5
1
2
3
4
6
7
(00)
Default 4K60YUV420-2CH
(01)
Copy EDID from far-end display
(10)
Copy EDID from loop out display
(11)
Default 4K60YUV444-5.1CH
EDID Switch Settings
Number
Name
Function / Description
1
HDMI Out
Connect the HDMI screen using a Premium High Quality HDMI cable.
2
Analogue Audio Out
Line level analogue stereo audio out for connecting to speakers or amplifier
3
Digital Toslink
Optical connection for amplifier or Sound Bar
4
CAT5e/6 In
Connect to CAT5e/5 cabling. This connection must be end to end and not include any
network products such as routers or switches. Connecting to these devices will cause
damage to both the transmitter and receiver.
5
Firmware
Used for firmware upgrades only.
6
IR In
Connect the IR Sender cable and place the receptor in line of sight of the IR remote.
7
DC Jack
Connect the 12V power supply (PoC - only needs 1 x PSU at either end)