TROUBLE-SHOOTING GUIDE
Symptom Probable Cause Corrective Action
Poor fog quality 1. Low Voltage. 1. Change to another power source.
2. Too light a gauge extension cord. 2. See page 2, Item #5.
3. Poor grade fogging material.
Dripping 1. Nozzle loose. 1. Tighten securely.
2. Excessive chemical output. 2. Adjust to drier output.
3. Worn out Barrel Assembly. 3. Replace with factory replacement
assembly only.
4. Other-see poor fog quality.
No fog- No spray 1. Nozzle obstructed. 1. Remove and clean nozzle with
(Unit vibrates) sharpened wooden toothpick.
DO NOT USE METAL OBJECT.
2. Pump plugged. 2. Insert toothpick into hole at
bottom of pump and pick out
foreign material.
3. No power at plug. 3. Check electrical connections, fuse
and extension cord.
No fog-Spray Ok 1. Worn-out Barrel Assembly. 1. Replace with factory replacement
assembly only.
2. Water base insecticide.
Page 6
