SCINTEX BD150, Руководство по сборке

Страница: 7 / 12

Copyright (c) Scintex www.scintex.com.au sales@scintex.com.au Page 7
Image 9
STEP 5 - Install Immersion Heater & Control Box
Screw the immersion heater into the 2" tank fitting at the bottom of the 200L cone bottom
tank. See Image 10. Note: You may need to remove the tank fitting to create room for the
immersion element to enter the tank.
Then attached the heater control unit to the cross beam holding the pump timer. See Image
11.
Image 10