TS-1018
8/26/2015
Scinomix, Inc.
How to Square the Z-Axis
Purpose
This troubleshooting guide will show how to square the Z-Axis for the Sci-Print VX2/VXL.
Please follow the steps below to properly square the Z-Axis.
Who Should Use This Troubleshooting Guide?
Technician
Instructions
1.
How to square the Z-axis.
a.
Remove the 4 hood screws using a 3mm allen wrench.
b.
If equipped remove the grounding strap located at the top left corner of the
upper gantry
c.
Remove the hood and set aside.
d.
Press the E-stop or turn unit off, and cut off airflow
