a
po
l
l is F LL you an s ill
take
a
po
l
is LO h
o b
ou an s ill
a
po
l
is E
TY h
o
(siz
. V x ).
an no lon
a
Press
AVG
MAX MIN
again and the MAX, MIN and AVG will blink together. This means that all these readings
are updated in the memory and the reading is the current temperature.
Press
AVG MAX MIN
to circulate the display mode among these options.
When the meter is under
AVG MAX MIN
operation, the “ REL” and “°C/°F” functions are disabled.
To exit the MAX/MIN mode, press and hold
AVG MAX MIN
for two seconds.
Auto Power Off
By default, the meter is in auto power off mode. The meter will power itself off after 30 minutes without
operation.
To disable the auto power off, press and hold the “HOLD” button and turn the meter on. There will be two
successive beeps to indicate that the auto power off has been disabled.
Low Battery
This meter indicates the battery power level directly on the display. Use this reference guide to establish
battery power level.
For complete instructions on how to replace the batteries see page 8.
7