SCIEX TripleTOF 5600, Руководство пользователя системы

Страница: 51 / 131

9. On the MS tab, click Edit Parameters .
10. On the Source/Gas tab, specify values in the fields as required.
11. On the Compound tab, specify values in the fields as required and then click OK .
12. Click a device icon and then select the parameters for the device.
13. Add any additional periods and experiments. Refer to Add an Experiment on page 51 and Add a Period on
page 51 .
14. Click File > Save.
Add an Experiment
1. In the Acquisition method pane, on the period where the experiment is to be added, right-click and then click
Add experiment .
Figure 7-1 Add Experiment
An experiment is added below the last experiment in the period.
Note: An experiment cannot be inserted between experiments, IDA criteria, or periods. Users can only add
an experiment at the end of the period.
2. In the MS tab, select the appropriate parameters.
Add a Period
• In the Acquisition method pane, right-click the Mass Spec icon, and then click Add period .
A period is added below the last period created.
TripleTOF
®
5600/5600+ System System User Guide
51 / 131 RUO-IDV-05-7040-B
Operating Instructions — Acquisition Methods