DIGITAL SERIES : 275 – 279 OVENS / 295 – 299 INCUBATORS
FRONT OF OVEN / INCUBATOR
DIGITAL OVEN / INCUBATOR
Safety
Mains
Control
Illuminated mains rocker switch
Safety thermostat selector knob
Safety thermostat pilot light
Digital Setpoint
Digital indicating
Did - Fuzzy
Temperature Controller
Pilot light control
Power Chord with Plug
Fuse holder
Fan cover
Exhaust vent duct
Door handle
REAR OF OVEN / INCUBATOR
LEGEND
DIGITAL TEMPERATURE CONTROLLER
1. Ensure that the oven /incubator door is closed.
2. Switch on the mains power switch of the unit via the “MAINS”
rocker switch.
3. The rocker switch will illuminate and the circulation fan will
immediately operate.
4. Set the desired control temperature via the “ELECTRONIC
TEMPERATURE CONTROLLER” As per instructions overleaf.
5. Set the “SAFETY” cut out temperature on the safety thermostat by
allowing the unit to reach the set “CONTROL” temperature and
setting the “SAFETY” temperature slightly above the set
temperature using the “SAFETY” thermostat selector knob.
