Scientific Industries TORBAL FB Precision Series, Инструкция по эксплуатации, Страница: 6 / 85

4
Instruction Manual
– FB and FC Series Force Gauges
Important Mounting and Installation Cautions

Force Gauge Capacity and swivel bearing joint must always exceed the predicted
measurement load.

Elements or parts used in mounting that are not supplied with the force gauge, such
as a shackle, rope, chain, nut or a bolt, must withstand force of no less than 150% of
force gauge capacity.
Warning!
Mounting bolts and other connection hardware, parts, or elements not supplied with the
force gauge must sustain loads of at least 150% of force gauge capacity. Any bolt or nut must
be precisely matched to the diameter of the swivel bearing joint with tolerance of at least
0.5mm. Swivel bearing joints must be protected against rapid movements and secured with
pads against slips.
- example of mounting hardware, parts, or elements
not supplied with the force gauge which must sustain
loads of at least 150% of the force gauge capacity -
Chapter 2: Specifications
- example of mounting hardware, parts, or elements
not supplied with the force gauge which must sustain
loads of at least 150% of the force gauge capacity -