background image

 

4004041 Rev C 

 

IMPORTANT SAFETY INFORMATION 

 

Heed All Warnings 

Adhere to all warnings on the product and in the operating instructions. 

Read, Retain, and Follow These Instructions 

Carefully read all safety and operating instructions before operating this product. Follow all 
operating instructions that accompany this product. Retain the instructions for future use. 
Give particular attention to all safety precautions. 

Comply with Warnings 

Avoid electric shock. Comply with all warnings and cautions in the operating instructions, as 
well as those that are affixed to this product. 

Power Warnings 

Providing a Power Source 

A label on this product indicates the correct power source for this product. Operate this 
product only from an electrical outlet with the voltage and frequency indicated on the 
product label. 

If you are uncertain of the type of power supply to your home or business, consult your 
service provider or your local power company. 

Grounding This Product (U.S.A. and Canada Only) 

 

 

WARNING:

 

To avoid electric shock and fire hazard, do not defeat the safety purpose of the 

polarized or grounding-type plug. A polarized plug has two blades with one 

wider than the other. A grounding-type plug has two blades and a third 

grounding prong. The wide blade or the third prong is provided for your 

safety. If the provided plug does not fit into your outlet, consult an electrician 

for replacement of the obsolete outlet. 

 

 

If this product is equipped with either a three-prong (grounding pin) safety plug or a two-
prong (polarized) safety plug, do not defeat the safety purpose of the polarized or 
grounding-type plug. Follow these safety guidelines to properly ground this product: 

ƒ

 

For a 3-prong plug (consists of two blades and a third grounding prong), insert the plug 
into a grounded mains, 3-prong outlet. 

Note: 

This plug fits only one way. The grounding prong is provided for your safety. If 

you are unable to insert this plug fully into the outlet, contact your electrician to replace 
your obsolete outlet.  

ƒ

 

For a 2-prong plug (consists of one wide blade and one narrow blade), insert the plug 
into a polarized mains, 2-prong outlet in which one socket is wider than the other. 

Содержание WebSTAR DPX2203





















































Отзывы: