13
TCP/IP Configuration,
continued
13. When the system finishes copying the
files, click OK.
14. Close all networking windows.
15. When the System Settings Change dialog
box appears, click YES to restart your
computer.
Configuring the TCP/IP Protocol for Windows 2000
Follow these steps to install and configure the
TCP/IP protocol for Windows 2000.
1. Click Start, select Settings, and choose
Network and Dial-up Connections
. The
Network and Dial-up Connections window
appears.
2. In the Network and Dial-up Connections
window, double-click Local Area Connection
icon. The Local Area Connection Status
window appears.
3. In the Local Area Connection Status window,
click Properties. The Local Area Connection
Properties window appears.
4. In the Local Area Connection Properties
window, select Internet Protocol (TCP/IP),
then click Properties. The Internet Protocol
(TCP/IP) Properties window appears.
5. In the Internet Protocol (TCP/IP) Properties
window, select both Obtain an IP address
automatically
, and Obtain DNS server
address automatically
, and then click OK. The
Local Network window appears.
6. In the Local Network window, click OK to
restart your computer.
Configuring the TCP/IP Protocol on a Macintosh
Note:
Many Macintosh computers have Ethernet
devices installed at the factory.
Follow these steps to verify that the TCP/IP
communications protocol and an Ethernet device is
installed on your system.
1. Click the Apple icon in the upper left corner
of the Finder. Scroll down to Control Panels,
and then click TCP/IP.
