12
Optional Devices
Connecting a VHF Transformer for Non-Cable-Ready TV
If your TV is not cable ready, follow these steps to
connect a VHF transformer.
After you connect the transformer, your TV is
considered “cable ready” and you can connect
additional electronic devices to your TV and the
DHCT.
Continue with connecting your TV to the DHCT
and any other devices in system.
Connecting a VCR Commander Module
T8812
Back of TV
1
2
3
4
Do not use
Connect to CABLE OUT on
DHCT or to OUT TO TV on VCR
Connect VHF transformer
Connect VHF antenna terminals
on TV
Contact your cable service provider for additional
information about the VCR Commander Module.
The VCR Commander Module is
a device consisting of an infrared
(IR) transmitter and cable that
allows you to use the IPG (on-
screen menu) for selecting the
programs you want to record.
You do not have to set your VCR
separately. Your VCR
automatically begins recording
the program you selected at the
set time and channel.
After connecting the VCR Commander Module to
your DHCT, place the IR transmitter in one of the
four locations shown in the following diagram.
IR
S - VIDEO
OUT
L
R
AUDIO
OUT
VIDEO
OUT
DIGITAL AUDIO
OUT
CABLE
OUT
T8899
IR Transmitter
T8512
A
B
C
D
Typical VCR
