Using Mode Keys
Press the appropriate mode key to switch the remote
control operation to the configured device:
TV
VCR
CBL
AUX
Assigning a Device Code to a Mode Key
Try to use your remote to control your devices. If the
remote does not work for a device, you can assign a
different device code to the appropriate mode key.
Before you begin, make sure you know the brand
name of the device you want to control.
1. Turn on your device.
2. Locate your device brand and device setup code
in the appropriate setup code list in this guide. If
your device brand is not listed, see Searching
the Code Library.
3. Point the remote away from your DHCT, TV,
VCR, or other electronic device.
AT 2000 Remote Control Quick Reference
Programming the Remote Control
4. On your remote, press and hold SELECT and
the appropriate mode key (CBL, TV, VCR,
AUX) until the light on the remote blinks twice.
5. Using the keypad on your remote , enter the 4-
digit setup code for your device. The light on the
remote blinks twice.
6. Confirm the setup code works by pointing the
remote toward the device and test the POWER,
VOLUME, and MUTE functions.
Note: Volume and Mute functions do not apply
to all devices (for example, Home Automation
devices).
7. Did the device operate correctly?
•
If yes, write down the code that worked in
the Record of Codes section in this guide.
You may need it again if the device code is
accidently erased.
•
If no, repeat this procedure from step 2 using
a different setup code.
Record of Codes
Record your setup codes in the following table.
Device Control
Sound Control
Viewing and Browsing Control
VCR/VOD Control
Introduction
In addition to operating your digital home
communications terminal (DHCT), you can
program the AllTouch
®
2000 (AT 2000)
Remote Control (remote) to operate your
TV, VCR, CD player, or other electronic
device. To program the remote, use the
following procedures.
Notes:
•
The remote requires two AA batteries
(alkaline recommended). A diagram in the
battery compartment of the remote indicates
proper placement of the batteries. When
batteries are properly installed, the light on
the remote blinks each time a key is pressed.
•
The AT 2000 Remote Control is not a toy. It
should be kept out of the reach of children
under the age of 6 years.
11
22
Functions vary by cable provider
Selects options in menus and program
guide
Displays program guide
Displays cable settings or Menu
Moves through menus or program
guides
Selects and deselects screen item
Displays channel and program
information
Selects channels, up or down
Enters channel numbers or
personal identification number
(PIN) for parental control
Views favorite channels
10
20
8
9
3
25
7
5
Note: Some remote keys may be assigned to
operate one device type only. For example,
volume control may be assigned to the TV only.
If this is the case, you can reprogram the power,
volume, and channel control using other
procedures in this guide.
Fast forwards VCR/VOD
Records program
Stops VCR/VOD
Plays VCR/VOD
Pauses VCR/VOD
Rewinds VCR/VOD
12
13
14
16
17
18
Returns to last channel viewed
Features vary by cable provider;
some provide access to pay-per-
view features. Note: Explorer
®
DHCTs provide access through
on-screen options.
Navigates through program
guide or settings
Exits settings, menus, and
guides
6
19
24
4
CBL
VCR
TV
AUX
23
21
28
26
2
1
27
15
TV Mode Key
Cable Mode Key
AUX Mode Key
VCR Mode Key
POWERS on or off
Functions as follows:
• While in VCR mode,
switches TV/VCR input
• While in TV mode,
switches TV/Video input
• While in CBL mode,
controls Bypass option
Adjusts volume
Mutes sound
AllTouch
®
2000
Remote Control
User’s Guide
AUX Setup Codes
CD Players
Aiwa
0171
Burmester 0434
California Audio Labs
0043
Carver
0171, 0193
DKK
0014
Denon
0017, 0887
Emerson
0319
Fisher
0193
Garrard
0434
Genexxa
0046, 0319
Harman/Kardon
0171, 0187
Hitachi
0046
JVC
0086
Kenwood
0042, 0051,
0204, 0640,
0695, 0840
Krell
0171
LXI
0319
Linn
0171
MCS
0043
MTC
0434
Magnavox 0171, 0319
Marantz
0043, 0171,
0194
Mission
0171
NSM
0171
Onkyo
0115, 0882
Optimus
0014, 0046,
0051, 0159,
0193, 0319,
0434, 0482
Panasonic 0043, 0317
Parasound 0434
Philips
0171, 0640
Pioneer
0046, 0319,
0482
Proton
0171
QED
0171
Quasar
0043
RCA
0067, 0193,
0319
Realistic
0193, 0194,
0434
Rotel
0171, 0434
SAE
0171
Sansui
0171, 0319
Sanyo
0193
Scott
0319
Sears
0319
Sharp
0051, 0194,
0875
Sherwood 0194
Sony
0014, 0504
Soundesign 0159
Tascam
0434
Teac
0194, 0434
Technics
0043, 0317
Victor
0086
Wards
0067, 0171
Yamaha
0050, 0201
Receivers
ADC
0545
Aiwa
0135, 0172,
0203, 1103,
1419
Capetronic 0545
Carver
0203, 1103,
1203
Denon
1118, 1174
Harman/Kardon
0124, 0203
JBL
0124
JVC
0088
Kenwood
0041, 1041,
1327, 1583
Linn
0203
MCS
0053
Magnavox 0203, 0545,
1103, 1203
Marantz
0053, 0203,
1103, 1203
Onkyo
0149
Optimus
0545, 1037
Panasonic 0053, 0323,
1532
Philips
0203, 1103,
1203
Pioneer
0028, 0545,
1037
Quasar
0053
RCA
0545
Sansui
0203, 1103
Sherwood 0516
Sony
0172, 1072,
1172, 1272
Technics
0053, 0323,
1322, 1323,
1532
Thorens
1203
Victor
0088
Wards
0028, 0172,
0203
Yamaha
0190
Amplifiers
Aiwa
0420
Carver
0283
Curtis Mathes
0314
Denon
0174
JVC
0345
Linn
0283
Magnavox 0283
Marantz
0283
Panasonic 0322
Philips
0283
Pioneer
0027, 0314
Sony
0703
Technics
0322
Victor
0345
Wards
0027
Yahama
0368
Home Automation
GE
0254
One For All 0181
Radio Shack
0254
Security System
0181
Universal X10
0181
X10
0181
Miscellaneous Audio
Jerrold
0473, 0534
Scientific-Atlanta 0474
Starcom
0473
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note
: This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly approved
by Scientific-Atlanta could void the user’s authority to
operate this equipment.
United States: Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway,
Box 465447, Lawrenceville, GA 30042
Product and service availability subject to change without notice.
All rights reserved. AllTouch, Explorer, Scientific-Atlanta, and the
Scientific-Atlanta logo are registered trademarks of Scientific-Atlanta,
Inc. AT2000 is a trademark of Scientific-Atlanta, Inc. All other
trademarks shown are trademarks of their respective owners.
© 2003 Scientific-Atlanta, Inc.
Printed in USA www.scientificatlanta.com
Part Number 715117 Rev C
December 2003
