Scientech 801C
Scientech Technologies Pvt. Ltd.
11
(18) Cal Out
:
Socket provided for square wave output 200mV
used
for probe compensation and checking
vertical sensitivity, etc.
(19) Volts/Div.
:
Switch selects Volt/Div. step for CH1 & CH2
(20) DC/AC/GND
:
Input coupling switch for each channel. In AC the
signal is coupled through 0.1MFD capacitor.
(21) CH1 (Y) &
:
BNC connectors serve as input connection for
CH2 (X)
CH1 & CH2 Channel 2 input connector also
serves as horizontal external Input.
(22) Time /Div.
:
Switch selects Time/Div. steps.
(23) Component Tester Input:
To test any components in the CT mode, put one
test prod in this socket and connect the other test
prod in ground socket.
(24) Trigger Input
:
Socket provided to feed external trigger signal in
External Trigger mode.
(25) Invert CH2
:
Switch when pressed invert polarity of CH2.
(26) Digital Readout
:
LCD window for displaying Digital Readout for
Volt/Div. & Time/Div. settings.
(27) Y Shift 1 & 2
:
Controls provided for vertical deflection of trace
for each channel.
Back Panel Controls
Fuse:
350mA fuse is provided at the back panel.
