AA
AA
AA
AA
PHASE 1
PHASE 2
Flip the tabs up carefully.
Take your first piece of foil and
remove paper lining. Stick it to
the outside face of the tab, fold
over the edge and attach to
other side as illustrated. Repeat
on the other side.
Tape a vellum shade to a
plywood screen. Make sure
not to tape over the illustra-
tions. Repeat with the
second shade and screen.
Fold the small
vellum tabs on the
vellum strap inwards and
slide the strip through a
slit. Open the tabs up to
hold the strip in place.
Insert the second plywood screen into its
slot and adjust the vellum strap over the
two screens by gently releasing and
pulling the loose vellum tab.
Insert one screen into the box
top slit as illustrated. The
vellum should be facing the
lightbulb.
Slide the rubber band
over foil covered tabs
to secure the battery.
Insert the battery
holder into the box
side slits as illustrat-
ed and connect the
sides. They snap
into place together
A
B
D
E
F
F
G
H
I
J
K
L
M
1
2
2
2
2
Insert battery into holder
Make sure any illustra-
tions you may have on
the box sides face
outwards
Thread light bulb holder through
opening on box top and secure it
in place. Fit should be tight.
Screw the lightbulb into the
holder.
Once the vellum is postioned around the
screen edges use tape to secure the tab as
illustrated
Position the vellum strip on
the plywood screen using
the indents on the vellum.
Slide the vellum through
the remaining slit.
