Don't be surprised when the progress bar reaches 10% and there is a long pause, just wait
patiently.
New firmware upgrades will be released regularly on the company's official website. Users can download the
latest firmware to upgrade as needed. Download address:“http://www.science-image.com/EN-DOWN-
LOAD/ ”After downloading, you canclick the [open upgrade page] button on the [system] page to enter the
upgrade page, orclick the figure icon in the upper right corner, and then click the [firmware upgrade] button
Just push the button.
After entering the page, click the [select file] button at , select the firmware to be upgraded,such as
siup-ndi-20201220b.si, and open it. At this time, there will be a progress prompt in the lower left corner of
the browser. When the progress is completed, the uploaded file information will be displayed. The button at
w will also change from red to green, and then click to start upgrading. As shown in the figure below:
1
2
10.3 Firmware upgrade
15
1
2