A variety of compatible 1/2” NPT threaded push-to-connect,
compression, and hose barb adapter drain fittings are available.
Important:
Always install a 1/2” NPT threaded plug in any
unused port(s) of the DrainHub, and always follow applicable
local plumbing codes.
scican.
com
SciCan
@SciCan
SciCanTV
scican
.com
Distributed by:
Phone
(419) 285-3927
VistaResearchGroup.com
Vista Research Group
PO Box 321
Ashland, Ohio 44805-0321
USA
Manufactured by:
SciCan Inc.
701 Technology Dr.,
Canonsburg, PA 15317
USA
Tel:
(724) 820-1600
Toll Free: 1-800-572-1211
Fax:
(724) 820-1479
SD-514 US EN R1.
DrainHub is a trademark of Vista Research Group, Ashland, OH. Your Infection Control Specialist is a trademark of SciCan Ltd.
Installation beside the main drain line
can offer maximum flexibility and can be
achieved with the use of a simple drain
tee adapter fitting.
When possible, as in cases of new
construction, it can be beneficial to
run parallel drain waste systems to
separate waste from the sink from other
appliances and devices.
When necessary, it is possible to install
the DrainHub fitting directly in the main
drain line under a sink. However, this
position can result in more audibly
noticeable drainage of waste containing
a significant amount of air.
DrainHub Position Under Sinks
Method A
Method B
Method C
The top and bottom hubs of the DrainHub fitting are designed to accommodate standard 1-1/2” PVC pipe or standard 1-1/2” trap
adapters for use with 1-1/2” or 1-1/4” tubular waste lines.
Connection to Waste Lines
1-1/2” Pipe Fits Inside Hubs
Outlet Hub Fits Into 2” Coupling
for 2” Discharge Port
Can Be Connected with
Trap Adapters
Capped
or Vent
Capped
or Vent