Figure 3.6
Figure 3.5
1
2
3
Use the circled
mounting holes only
Insert screws in the four circled locations
8
ATTACH THE FRONT FENDER
❶ Place the front fender on the frame and over the front
wheel. Figure 3.5
❷
Align the mounting holes with the holes in the frame.
Note: There are six posts with mounting holes on the
underside of the bumper. DO NOT use the bottom set
of holes.
❸ Insert the screws through the holes in the frame and tighten
the front fender to the frame. Be sure the front wheel does
not rub against the front fender. Figure 3.6
