Installation
Page 2
620-8543 Rev. A
Pairing the 4iiii Crank:
1. Press and hold “STAGE” and “AVG/MAX” for 3-5 seconds to access the service menu.
2. Use “AVG/MAX” to scroll until “SENSOR TYPE” is displayed then push the backlight button to access the sensor
menu. Ensure that “4iiii” is displayed as the sensor type.
3. If the sensor type is set to “Echelon 2” press the backlight button to select the sensor type, use the “AVG/MAX”
button to select “4iiii” then press the backlight button again.
4. Once “4iii” is selected the consoel will enter the pairing process, check the label on the power sensor for a
5-digit ANT+ ID code. Enter this code on the “ENTER AND IT” screen using “AVG/MAX” to scroll and the back-
light to enter the ANT+ ID.
5. Once the ANT+ IT has been entered, pedal the bike, then select “PAIRING SPIN CRANK” but pushing the back-
light button. If pairing does not pass, check to ensure the ANT+ ID is correct and try the pairing process again.
It may take 2-3 attempts to pair successfully.