Schwinn 131 Upright Bike, Инструкция по сборке, Страница: 12 / 20

9
A
ssembl
y
iN
s
tr
UC
ti
ON
s
Step 4 Install Seat
parts:
• seat (ref. g-8)
tools:
• Supplied Wrench
4-1 Position the Seat (G-8) on the top of the Seat Slider. Tilt the the
Seat to desired angle and tighten the two nuts on the underside
of the Seat until completely tight.
Seat Adjustment:
To adjust the Seat Post height, unscrew the Adjustment Knob
about one full turn and pull outward on the knob. Slide the Seat
Post to desired postition. Release the Adjustment Knob (F-7) and
allow the Seat Post to lock into place then tighten the Adjustment
Knob. Adjust the fore and aft postion wit the Slider knob ( G-1).
When properly adjusted, your leg should have a slight bend at
the bottom of the pedal stroke.
G-8
G-1
F-7