13
Introduction
SPB Operation Manual
How to reach us
If you encounter a circumstance that is not covered
by this manual, Schwing America’s Call Center will be
more than happy to assist you with all of your parts and
service needs.
• Call Center
1- 888-SCHWING (724-9464)
• Spare Parts
1- 800- 328 - 9635
• Spare Parts FAX
(651) 429 - 2112
•
Minnesota (main office)
(651) 429 - 0999
To place an order for spare parts, go online to
schwingparts.com
, or call our toll free parts line from
anywhere in the continental United States. Call Center
hours are Monday through Friday, 6:00 AM to 6:00 PM
(central time). Orders will also be accepted via fax, 24
hours/day.
When contacting the Call Center please provide the
seperate placing boom model and serial number. You
can find the model and serial number on the Main ID tag
that is mounted on the unit (Figure 5).
ID Tags
There are three information tags on each separate plac-
ing boom. The Boom ID tag, Power Pack ID tag and
Lifting Weight tag.
Boom ID and Pipeline tag
The Boom ID and Pipeline tag is located on the passen-
ger side of the #1 (main) boom, just behind the hollow
pin (Figure 2). The Boom ID and Pipeline tag contains
information about the boom reach, pipeline diameter,
and boom serial number. The tag also gives the exact
length of each boom section’s makeup pipe. The tip
section does not have an odd length, because the end
clamp is movable, which allows a variance of any length
to be corrected. The boom serial number is stamped
into the #1 boom section above or below the boom ID
tag.
The ID tags shown here are for illustration only.
Check the tags on your unit to obtain the specific
numbers which apply to your SPB.
30334197-01
White Bear, Minnesota
phone: (651) 429-0999
www.schwing.com
PRESSURE & WEIGHT INFORMATION
INFORMACIÓN DE PRESIÓN Y PESO
Maximum allowable bulk density of material to be pumped is:
150
Pounds per cubic foot
PUMPKIT MODEL:
La densidad máxima admisible a granel del material a ser bombeado es de: 150 libras
por pie cúbico
MODELO PUMPKIT:
BOOM MODEL:
YEAR:
SERIAL NUMBER:
MODELO DE PLUMA:
AÑO:
NÚMERO DE SERIE:
ROLL AND FOLD
BOOM
U.S. PATENT 3,685,543
MAIN
principal
3rd
2nd
4th
LENGTH of the MAKE UP PIPES (See parts book for standard lengths)
LARGO de las TUBERÍAS NECESARIAS
(Consulte el libro de repuestos para ver los largos estándar)
Pipeline wears with each pump stroke. Check pipewall thickness
regularly! See manuals.
La tubería se desgasta con cada carrera de la bomba. ¡Compruebe con
regularidad el espesor de las paredes de los tubos! Consulte los manuales.
WARNING!
¡ADVERTENCIA!
Maximum pressure in boom hyd. system: 350 bar
La presión máxima del sistema hidráulico de la pluma: 350 barias
Maximum total weight of system components hanging from boom, (lbs):
El peso máximo total de los componentes del
sistema que cuelgan de la pluma, (libras):
PSI
When configured for ROD side pumping, this unit will produce
a maximum material pressure of:
Cuando está configurada para bombear del lado de la BIELA,
esta unidad producirá una presión de material máxima de:
PSI
When configured for PISTON side pumping, this unit will produce
a maximum material pressure of:
Cuando está configurada para bombear del lado del PISTÓN,
esta unidad producirá una presión de material máxima de:
Lbs
per
ft
Lbs
per
ft
Maximum weight of boom pipeline WITHOUT CONCRETE is:
El peso máximo de la tubería de la pluma SIN CONCRETO es de:
Maximum weight of boom pipeline INCLUDING CONCRETE is:
El peso máximo de la tubería de la pluma INCLUIDO EL
CONCRETO es de:
mm
mm
mm
mm
Figure 2
Boom and Pipeline ID Tag
Power Pack Lifting Weight tag
The Power Pack lifting weight tag shows the specific
lifting weight for the power pack only (Figure 3).
Peso de fabricación para alzar:
Lifting weight as manufactured:
30380626-01
Do not paint over this label/No pintar encima de ésta etiqueta
POWER PACK 5960 LBS
Figure 3
Power pack lifting weight
Power pack ID tag
The Power Pack ID tag gives information regarding only
the power pack: horse power rating, electrical capabil
-
ity, maximum hydraulic pressure, year of manufacture,
serial number of the power pack, and assembly number
(Figure 4). The location of the power pack ID tag is just
right of the slweing gear (Figure 5).
5900 Centerville Road
White Bear, Minnesota 55127
Phone (651) 429-0999
www.Schwing.com
Subsidiary of:
Schwing GmbH
30317962 B
HP
Volts
Amps
Hz
Phase
Maximum Hydraulic Pressure:
PSI
Year:
Serial Number:
Assembly Number:
40
3
60
460
35.0
4350
2006
10259
30405967
powerpacID.eps
Figure 4
Power Pack ID Tag
Содержание SPB 28
